[MASTER]
# A comma-separated list of package or module names from where C extensions may
# be loaded. Extensions are loading into the active Python interpreter and may
# run arbitrary code.
extension-pkg-allow-list=

# Specify a score threshold to be exceeded before program exits with error code.
fail-under=10.0

# Add files or directories to the blacklist. They should be base names, not
# paths.
ignore=CVS

# Add files or directories matching the regex patterns to the blacklist. The
# regex matches against base names and not paths.
ignore-patterns=

# Python code to execute, usually for sys.path manipulation such as
# pygtk.require().
#init-hook=

# Use multiple processes to speed up Pylint. Specifying 0 will auto-detect the
# number of processors available to use.
jobs=1

# Control the amount of potential inferences PyLint can do when analyzing open
# files. Increasing this value might help you get proper information for your
# scripts, but can also result in longer computation time. This is a trade-off
# you can make as you see fit. It defaults to 0.
limit-inference-results=100

# List of plugins (as comma separated). Plugins should always be named after
# their package or modules names, not the filename in the plugins directory.
load-plugins=

# Minimum Python version to target. Used for version dependent checks and
# annotations parsing.
py-version=3.9

# Allow optimization of some simple Pylint rules at the cost of some lost
# message locations accuracy.
unsafe-load-any-extension=no


[MESSAGES CONTROL]

# Only show warnings with the listed confidence levels. Leave empty to show
# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED
confidence=

# Disable the message, report, category or checker with the given id(s). You
# can either give multiple identifiers separated by comma (,) or put this
# option multiple times (only on the command line, not in the configuration
# file where it should appear only once). You can also use "--disable=all" to
# disable everything first and then reenable specific checks. For example, if
# you want to run only the similarities checker, you can use "--disable=all
# --enable=similarities". If you want to run only the classes checker, but have
# no Warning level messages displayed, use "--disable=all --enable=classes
# --disable=W"
disable=
    # Blender addon specific disables
    wrong-import-position,     # C0413: Blender requires bl_info before imports
    too-many-lines,            # C0302: Large addon files are acceptable
    invalid-name,              # C0103: Blender naming conventions (e.g., ADDON_OT_OperatorName)
    too-few-public-methods,    # R0903: Blender Operators have required structure
    unused-argument,           # W0613: Blender callbacks have required signatures
    import-error,              # E0401: bpy module not available in linting environment
    import-outside-toplevel,   # C0415: Lazy imports common in Blender addons
    no-else-return,            # R1705: elif after return (acceptable pattern)
    too-many-return-statements,# R0911: Command routers need multiple returns

    # Additional useful disables for development
    fixme,                     # W0511: TODOs and FIXMEs in code
    duplicate-code,            # R0801: Similar lines in multiple locations


[REPORTS]

# Python expression which should return a score less than or equal to 10 (10 is
# the highest value). You have access to the variables 'fatal', 'error',
# 'warning', 'refactor', 'convention', and 'info' which represent the number of
# messages in each category, as well as 'statement' which represents the total
# number of statements analyzed. This score is used by the global evaluation
# report (RP0004). Evaluation of this score is skipped if it's value is "-1".
evaluation=max(0, 0 if fatal else 10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10))

# Set the output format. Available formats are text, parseable, colorized, json
# and msvs (visual studio). You can also give a reporter class e.g. mypackage.
# mymodule.MyReporterClass --output-format=parseable
output-format=text

# Tells whether to display a full report or only the messages
reports=no

# Tells whether to display a full report or only the messages
score=yes


[REFACTORING]

# Maximum number of nested blocks for function / method body
max-nested-blocks=5

# Complete name of functions that never returns. When checking for
# inconsistent-return-statements if a never returning function is called then
# it will be considered as an explicit return statement and no message will be
# printed.
never-returning-functions=sys.exit,argparse.ArgumentParser.error


[BASIC]

# Naming style matching correct argument names.
argument-naming-style=snake_case

# Regular expression matching correct argument names. Overrides argument-
# naming-style. If left empty, argument names will be checked with the set
# naming style.
argument-rgx=

# Naming style matching correct attribute names.
attr-naming-style=snake_case

# Regular expression matching correct attribute names. Overrides attr-naming-
# style. If left empty, attribute names will be checked with the set naming
# style.
attr-rgx=

# Bad variable names which should always be refused, separated by a comma.
bad-names=foo,bar,baz,toto,tutu,tata

# Naming style matching correct class attribute names.
class-attribute-naming-style=any

# Regular expression matching correct class attribute names. Overrides class-
# attribute-naming-style. If left empty, class attribute names will be checked
# with the set naming style.
class-attribute-rgx=

# Naming style matching correct class constant names.
class-const-naming-style=UPPER_CASE

# Regular expression matching correct class constant names. Overrides class-
# const-naming-style. If left empty, class constant names will be checked with
# the set naming style.
class-const-rgx=

# Naming style matching correct class names.
class-naming-style=PascalCase

# Regular expression matching correct class names. Overrides class-naming-
# style. If left empty, class names will be checked with the set naming style.
class-rgx=

# Naming style matching correct constant names.
const-naming-style=UPPER_CASE

# Regular expression matching correct constant names. Overrides const-naming-
# style. If left empty, constant names will be checked with the set naming
# style.
const-rgx=

# Minimum line length for functions/classes that require docstrings, shorter
# ones are exempt.
docstring-min-length=-1

# Naming style matching correct function names.
function-naming-style=snake_case

# Regular expression matching correct function names. Overrides function-
# naming-style. If left empty, function names will be checked with the set
# naming style.
function-rgx=

# Good variable names which should always be accepted, separated by a comma.
good-names=i,j,k,ex,Run,_,x,y,z,dx,dy,dz,bpy

# Naming style matching correct method names.
method-naming-style=snake_case

# Regular expression matching correct method names. Overrides method-naming-
# style. If left empty, method names will be checked with the set naming style.
method-rgx=

# Naming style matching correct module names.
module-naming-style=snake_case

# Regular expression matching correct module names. Overrides module-naming-
# style. If left empty, module names will be checked with the set naming style.
module-rgx=

# Colon-delimited sets of names that determine each other's naming style when
# the name regexes allow several styles. This is useful for enforcing naming
# consistency across properties, getters, and setters. Each named set should
# contain RegEx rule names to its own set. The RegEx rules in the same set must
# have compatible naming style. This is done in order to make sure they can
# interchangeably be used.
name-group=

# Regular expression which should only match function or class names that do
# not require a docstring.
no-docstring-rgx=^_

# List of decorators that produce properties, such as abc.abstractproperty. Add
# to this list to register other decorators that produce valid properties.
# These decorators are taken in consideration only for invalid-name.
property-classes=abc.abstractproperty

# Naming style matching correct variable names.
variable-naming-style=snake_case

# Regular expression matching correct variable names. Overrides variable-
# naming-style. If left empty, variable names will be checked with the set
# naming style.
variable-rgx=


[FORMAT]

# Regexp for a line that is allowed to be longer than the limit.
ignore-long-lines=^\s*(# )?<?https?://\S+>?$

# Number of spaces of indent required inside a hanging or continued line.
indent-after-paren=4

# String used as indentation unit. This is usually "    " (4 spaces) or "\t" (1
# tab).
indent-string='    '

# Maximum number of characters on a single line.
max-line-length=100

# Maximum number of lines in a module.
max-module-lines=1000

# Allow the body of a class to be on the same line as the declaration if body
# contains single statement.
single-line-class-stmt=no

# Allow the body of an if to be on the same line as the test if there is no
# else.
single-line-if-stmt=no


[LOGGING]

# The type of string formatting that logging methods do. `old` for %
# formatting, `new` for {} formatting and `fstring` for f-strings.
logging-format-style=old

# Format template used to check logging format string.
logging-modules=logging


[MISCELLANEOUS]

# List of note tags to take in consideration, separated by a comma.
notes=FIXME,XXX,TODO

# Regular expression of note tags to take in consideration.
notes-rgx=


[SIMILARITIES]

# Comments are removed from the similarity computation
ignore-comments=yes

# Docstrings are removed from the similarity computation
ignore-docstrings=yes

# Imports are removed from the similarity computation
ignore-imports=no

# Signatures are removed from the similarity computation
ignore-signatures=no

# Minimum lines number d a similarity.
min-similarity-lines=4


[SPELLING]

# Limits count of emitted suggestions for spelling mistakes.
max-spelling-suggestions=4

# Path to a dictionary that some tests and fixers may parse and use.
spelling-dict=

# Tells whether to spell check word list when using the quiet mode
spelling-ignore-words=

# A path to a file with private dictionary; one word per line.
spelling-private-dict-file=


[VARIABLES]

# List of additional names supposed to be defined in builtins. Remember that
# you should avoid defining new builtins when possible.
additional-builtins=

# Tells whether unused global variables should be treated as a violation.
allow-global-unused-variables=yes

# List of names allowed to shadow builtins
allowed-redefined-builtins=

# List of strings which can identify a callback function by name. A callback
# name must start or end with one of those strings.
callbacks=cb_,_cb

# A regular expression matching the name of dummy variables (i.e. expected to
# not be used).
dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|^ignored_|^unused_

# Argument names that match this expression will be ignored.
ignored-argument-names=_.*

# Tells whether we should check for unused import in __init__ files.
init-import=no


[CLASSES]

# Validate membership accesses on modules/namespaces based on the public API
# advertised by a module's all definition.
check-protected-access-in-special-methods=no

# List of method names used to declare an abstract method. The naming doesn't
# matter, as long as the method has the property decorated with
# "abstractmethod" anything else will be ignored.
defining-attr-methods=__init__,__new__,setUp,__post_init__

# List of member names, which should be excluded from the protected access
# warning.
exclude-protected=_asdict,_fields,_replace,_source,_make,os._exit

# List of valid names for the first argument in a class method.
valid-classmethod-first-arg=cls

# List of valid names for the first argument in a metaclass class method.
valid-metaclass-classmethod-first-arg=cls


[DESIGN]

# Maximum number of arguments for function / method
max-args=5

# Maximum number of attributes for a class
max-attributes=7

# Maximum number of boolean expressions in an if statement
max-bool-expr=5

# Maximum number of branch for function / method body
max-branches=12

# Maximum number of locals for function / method body
max-locals=15

# Maximum number of parents for a class (see R0901)
max-parents=7

# Maximum number of public methods for a class
max-public-methods=20

# Maximum number of return / yield for function / method body
max-returns=6

# Maximum number of statements in function / method body
max-statements=50

# Minimum number of public methods for a class
min-public-methods=2


[IMPORTS]

# Analyse import fallback blocks. This can be used to support both Python 2 and
# 3 compatible code, which means you may have duplicated imports (same
# imports in try except blocks). By default it set to False.
analyse-fallback-blocks=no

# Create a graph of external dependencies in the given file (report RP0402 must
# not be disabled)
ext-import-graph=

# Create a graph of every (i.e. non external) dependencies in the given file
# (report RP0402 must not be disabled)
import-graph=

# Create a graph of those files that have a dependency loop.
int-import-graph=

# Force import order to recognize a module as part of the standard
# compatibility libraries.
known-standard-library=

# Force import order to recognize a module as part of a third party library.
known-third-party=enchant


[EXCEPTIONS]

# Exceptions that will emit a warning when being caught. Defaults to
# "BaseException, Exception".
overgeneral-exceptions=builtins.BaseException,builtins.Exception